Categories
Test Equipment, Systems & Solutions
-
Schwarzbeck HFSL 7101 Active Magnetic Field Probe
SKU: sku-1404
Frequency Range: 9 kHz - 30 MHzCoaxial cable connector: 50 ΩAntenna Factor for fict. E-fieldstrength: typ. 61.5 - 69.5 dB/mFrequency response: typ. +/- 4 dBDC separator: EW 7110AC/DC adapter: ACDC 7110Inquire for Availability -
AR 25S1G4A 0.8 - 4.2 GHz, 25 Watts CW Microwave Amplifier
SKU: 4163
Frequency Range: 0.8 - 4.2 GHzOutput Power: ~30 Watts P1dBIn Stock -
Inquire for Availability -
Schwarzbeck NNLK 8130 Line Impedance Stabilization Network
SKU: sku-1149
Videos: Debugging FailuresApplications: Conducted Emissions, BCI Testing , Automotive EV EMCTest Standards: CISPR 16-1-2, FCC part 15, ISO 60601-1-2Typically In Stock -
3ctest EDS 20H Hand-held 20kV Electrostatic Discharge ESD Simulator
SKU: 3209
Air Discharge Voltage Range: 1,000 Volts to 20,000 Volts ±5%Contact Discharge Voltage Range: 1,000 Volts to 20,000 Volts ±5%Display Monitor: LCD 128 x 64Holding Time: Greater than 5 secondsPolarity: positive, negative, alternatingStandards Met: IEC/EN 61326, IEC/EN 61000-6-1, IEC/EN 61000-6-2Additional Standards Met: IEC 61000-4-2, IEC 61326Additional Standards Met: ISO 10605, ITU-TK.20, GB/T 17626.2IN STOCK -
Com-Power LI-325C Line Impedance Stabilization Network
SKU: 10891
Weight: 5 lbs. / 2.2 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 25 Amps (AC), 17 Amps (DC)Dimensions: 13 x 7.5 x 8 inches / 33 x 19 x 20 cmFrequency Range: 10 kHz to 400 MHzInductors: 5 µH (air-core)Insertion Loss: 0.3 dB (150 kHz to 30 MHz)Mains & EUT Connections: Superior Electric SUPERCON® shrouded socketsRF Connector: 50Ω N-type (female)Standards Met: RTCA DO-160 / MIL-STD 461DVoltage Rating: 270 VAC (Line to Ground), 380 VDCInquire for Availability -
Teseq CDN T8 Coupling/Decoupling Network for RJ 11, RJ45 PoE 1Gbps Testing
SKU: sku-862
Common Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45ΩCurrent Rating: 500mA (line), 1.2A (pair)Decoupling of Common Mode Disturbance: 150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 80 MHz: 150 Ω +60 Ω / -45 ΩFrequency Range: 150 kHz to 230 MHzMains & EUT Connections: 50 Ohm Female BNCRF Connector: 50 Ω BNC (Female)RF Input Voltage: 15 Volts MaxStandards Met: IEC / EN 61000-4-6Voltage Division Factor: 9.5 dB ±1 dBVoltage Rating: 63 V AC / 100 V DC (Line to Ground) -
TDK EFG-03 High Power E-Field Generator 10 kHz - 100 MHz, up to 500 V/m
SKU: sku-841
Weight: 68 kg (150 lbs.)Connector type: 7/16 femaleTest Standards: MIL-STD-461 RS103, DO-160Applications: Radiated SusceptibilityBuilt in Load: YesMax Radiated Field Strength: 500 V/mTypically In Stock -
EM Test LD 200N Load Dump Generator for ISO 16750-2
SKU: sku-817
Output: +/- output Safety laboratory connectors Coupling To the battery +lineDecoupling Via diodeDUT supply Max. 80V/30AFreestyle Mode Micropulses: Rise time 1us 10us - 90us with 10us steps 100us - 900us with 100us steps 1ms - 10ms with 1ms steps Pulse duration 10ms - 1,200ms Int. resistor 0.5ohm - 38ohm, in steps of 0.1ohmTest Standards: ISO 7637-2 Pulse 5b for 12V and 24V, ISO/WD 16750 Pulse 5b, and much moreTest Routines: Quick Start, User Defines Routines, Standards Test Routines Service$1,690.00Typically In Stock -
Amplifier Research AR 15S1G6, 15 Watt, 0.7 GHz – 6 GHz, RF Power Amplifier
SKU: sku-703
Weight: 15.9 kg (35 lbs)Dimensions: 50.3 x 15.5 x 37.6 cm 19.8 x 6.1 x 14.8 inFlatness: ±1.5 dB typical; ±2.0 dB maximumFrequency Range: 0.7–6GHz instantaneouslyGain: GAIN (at maximum setting): 43 dB minimum GAIN ADJUSTMENT (Continuous Range): 10 dB minimum (4096 steps remote)Impedance: 50 ohmsInput: 90-132, 180-264 VAC; 50/60 Hz, single phase; 210 watts maximumOutput: POWER OUTPUT @ 3dB COMPRESSION: Nominal, 20 watts; Minimum, 15 watts POWER OUTPUT @ 1dB COMPRESSION: Nominal, 15 watts; Minimum, 12 wattsRF Connector: Type N femaleRF Input Voltage: 1.0 milliwatt maximum for rated outputInquire for availability -
Com-Power PS-500 RF Near Field Probe Kit, 9 kHz - 5 GHz
SKU: 11691
Applications: EMC Precompliance Testing, Conducted Emissions, Radiated Emissions$49.00In Stock -
3ctest PFS 6050A Automotive Power Failure Simulator
SKU: 3C-PFS6050A
Voltage Handling: 0 to 60 VTest Standards: LV 124, VW80000, GMW 3172, BMW GS 95003-2, Chrysler PF-9326, Cummins 14269(982022-026), DaimierChrysler DC-10842, Fiat 9.90110, Ford EMC-CS-2009.1, DaimlerChrysler PF-10541, Hyundai/Kia ES 96100-02, Hyundai ES 39110-00Peak current: 60A duration time 500 msApplications: Automotive EMC Testing$975.00In Stock