Overview
The Cable Winch CW 13 is designed to lift up loads above the EUT inside a magnetic absorption chambers. All metal parts of the CW are mounted outside the chamber on top of the chamber structure. Only three non-conductive ropes are feed-trough the chamber ceiling.
The Cable Winch is controlled by a handheld control unit outside the SAC.
| Technical Data | |
| Number of ropes | 3 |
| Net load of one rope | 1420 kg (1420 daN) |
| Max. load for the objects under test | 2 tones (2000 daN) |
| Lifting range from Limited with positioning switches | 0 to 13 m |
| Positioning speed adjustable up to max. | 7 m/min. |
| Lifted with three electrical non-conductive cables | |
| Circular cross diameter of cables | 9 mm |
| Max. tensile load | 80 kN |
| Operating Voltage | 400 V, 50 Hz, three-phase |
| Rated power | 2.9 kW |
| Rating current | 18 A |
| Rating moment | 57.8 Nm |
| Starting current | 32.4 A |
| Starting moment | 104.1 Nm |
| Braking moment | 100 (Disk brake) |
| Temperature range | +10 °C...+35 °C |
