IEC/EN Standards Categories
IEC/EN Standards Test Equipment
-
-
-
Teseq GTEM 500 GTEM Cell for Emissions and Immunity Testing
SKU: sku-31
Max EUT Size: 16" by 16" by 12"Applications:Radiated Immunity, Radiated Emissions Max Input Power (CW): 400 WattsDimensions (Footprint): 9.75' x 4.8' x 5.2'Frequency Range: DC - 20 GHz -
-
In Stock
-
Haefely DIP 116 Automatic Dips Transformer 16 Amps 40/70/80%
SKU: HAE-DIP116
Test Standards: IEC 61000-4-11Typically In Stock -
Teseq/Ametek CTS NSG 4070D
SKU: 10549
Standards Met: IEC 61000-4-6, MIL-461 CS114, ISO 11452-4, DO-160 Section 20 Conducted SusceptibilityApplications: Bulk Current Injection Testing, RF Conducted ImmunityInternal Amplifiers: 50 or 100 Watts (or none)System Frequency Range: 4 kHz - 1 GHzInternal Amp Frequencies: 150 kHz to 230 MHz or 4 kHz to 400 MHzTypically In Stock -
ESD Test Table
SKU: 11246
Floor Ground Plate Dimensions: 9" by 6" (Custom sizes available)Standards Met: IEC 60601-1-2, IEC 61000-4-2Table Dimensions: .8 meters (H)Table Top Ground Plane: 1.6m x .8m$1,750.00 - $4,950.00Typically Ships in 48-72 Hours -
LPA4G-80M High Power Log Periodic Antenna
SKU: 12445
Weight: 4.6 lb.'s (2.09 kg)Antenna Factor (1 Meter): 5 to 36 db/mApplication/Test Type: RF Radiated Susceptibility Testing, Radiated Emissions TestingDimensions: 56.3" x 72.3" (143cm x 183.6cm)Frequency Range: 80 MHz - 4 GHz$250.00 - $495.00In Stock -
Schwarzbeck CDN M4PE 32A Coupling Decoupling Network
SKU: 6657
Frequency Range: 150 kHz to 230 MHzCommon Mode Impedance: 150 kHz – 24 MHz: 150 Ω ±20 Ω, 24 MHz–80 MHz: 150 Ω +60 Ω/-45 Ω, 80 MHz–230 MHz: 150 Ω ±60 ΩMax. RF Test Voltage: 30 VRF Input Power: 6 WInput voltage EuT (AE): Line to ground / line to line: 500 VAC / 1000 VDC, 1000 VAC / 2000 VDC$295.00 - $3,095.00Typically In Stock -
Schwarzbeck CMDM 8700 B Common Mode / Differential Mode Switch
SKU: 8564
Frequency Range: 9 kHz – 108 MHzConnector: BNCImpedance of Line A, Line B and output port: 50 ΩVoltage division factor at the measuring port: -20 dB +/-3 dBApplications: Radiated Emissions$2,775.00Typically in Stock -
VCP-FS Vertical Coupling Plane with Voltage Bleeding Cable
SKU: 4378
Standards Met: IEC 61000-4-2Applications: Conducted Immunity, Electrostatic Discharge Immunity TestVCP Aluminum Size: 50 x 50 cm / 19.7 x 19.7 inVoltage Bleeding Cable: Includes two 470kΩ resistorsHeight: 1.5m/4.9 ft or 2.25m/7.3 ftIn Stock