MIL-STD-461 RE101

(Showing 6 of 18)

Rent, buy, or lease measurement equipment for MIL-STD-461 RE101 radiated emissions, magnetic field requirements. The EMC Shop specializes in military electromagnetic compliance testing.

OVERVIEW OF MIL-STD-461 RE101

Radiated Emissions, magnetic field

This requirement is applicable from 30 Hz to 100 kHz for radiated emissions from equipment and subsystem enclosures, including electrical cable interfaces. The requirement does not apply to radiation from antennas.

This test procedure is used to verify that the magnetic field emissions from the EUT and its associated electrical interfaces do not exceed specified requirements.

RESOURCES

MIL-STD-461 RE101 LIMIT LEVELS

Radiated emissions limits for Army Electronics - MIL-STD-461 RE101
Radiated emissions limits for Navy Electronics - MIL-STD-461 RE101

MIL-STD-461 RE101 TEST SETUP

Diagrams of MIL-STD-461 RE101 test setup with rod, biconical, and double ridge horn antennas.

MIL-STD-461 RE101 REQUIRED TEST EQUIPMENT

  • Measurement receivers
  • Data recording device
  • Loop sensor having the following specifications:
    • Diameter: 13.3 cm
    • Number of turns: 36
    • Wire: DC resistance between 5 and 10 ohms
    • Shielding: Electrostatic
    • Correction factor: See manufacturer’s data for factors to convert measurement receiver readings to decibels above one picotesla (dBpT).
  • LISNs e. Ohmmeter
  • Signal generator
Show 12

MIL-STD-461 RE101 Test Equipment, Systems & Solutions

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form