RF Test Equipment

(Showing 12 of 246)

RENTALS SHIP SAME DAY

The EMC Shop has a large inventory of RF test equipment. Typically equipped with options suitable for compliance testing, many customers use the same equipment for general test uses.

CONTACT FORM

RF TEST EQUIPMENT MANUFACTURERS

Keysight
Rohde & Schwarz
Tektronix
Anritsu
Siglent
Rigol
Aeroflex
Signal Hound

WHY THE EMC SHOP

Established Supplier
Large Inventory
ISO 17025 Accredited Cal Lab
Creative Solutions
Fast Response Time

RF Test Equipment Categories

Vector Network Analyzers

RF Spectrum Analyzers Rental

RF & Microwave Signal Generators

GNSS Constellation/Signal Simulators

RF Cable & Antenna Analyzers/Testers

RF Test Equipment Test Equipment, Systems & Solutions

AH Systems PAM-0118P Broadband Preamplifier, 20 MHz - 18 GHz

SKU: 2669

Weight: 1.1 lbs. / 0.5 kg

Application/Test Type: Improve overall system sensitivity for field measurements.

Connector: N(f) to N(f)

Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

Frequency Range: 20 MHz - 18 GHz

Gain: 37 dB typical

Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

Maximum Continuous Power: + 10 dBm @ 1 dB compression

VSWR: 2.5:1 typical

Inquire for Availability

VIEW PRODUCT Cart
AH Systems PAM-0207 Preamplifier, 20 MHz - 7 GHz

SKU: 10209

Weight: 1.1 lbs. / 0.5 kg

Application/Test Type: Improve overall system sensitivity for field measurements.

Connector: N(f) to N(f)

Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

Frequency Range: 20 MHz - 7 GHz

Gain: 30 dB typical (25 dB minimum)

Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

Maximum Continuous Power: + 3 dBm @ 1 dB compression

VSWR: 2.2:1 Input; 1.8:1 Output

VIEW PRODUCT Cart
Teseq LNA 6018 Low Noise Amplifier 1 GHz to 18 GHz

SKU: sku-83

Weight: 220 grams (0.3 Lbs)

Application/Test Type: Significantly increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments

Connector: IN: SMA female 50 Ohms; OUT: SMA male 50 Ohms

Dimensions: 39 mm x 88 mm x 36 mm

Frequency Range: 1 GHz - 18 GHz

Gain: 22 dB typical (± 3 dB flatness)

Input: less than -10 dBm

VSWR: less than 2:1 typical

VIEW PRODUCT Cart
Teseq LNA 6901 Low Noise Amplifier 9 kHz to 1 GHz

SKU: sku-82

Weight: .27 Lb's (127 grams)

Application/Test Type: Increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments

Connector: N-type 50 Ohms

Dimensions: 28 mm x 95 mm x 27 mm

Frequency Range: 9 kHz to 1 GHz (nominal range); 9 kHz to 2 GHz (utilizable range)

Gain: 28 dB typical (±1 dB flatness)

Input: -20 dBm (87 dBμV)

Maximum Continuous Power: +8 dBm @ 1 dB compression

VSWR: Less Than 1.5:1

VIEW PRODUCT Cart
Anritsu S810D SiteMaster Cable and Antenna Analyzer

SKU: 8865

Frequency Range: 0.025 GHz to 10.5 GHz

Output Power: <0 dBm (at any frequency)

Measurement Accuracy: ≥42 dB corrected directivity after calibration for <5 GHz, ≥36 dB corrected directivity after calibration for <15 GHz, ≥32 dB corrected directivity after calibration for >15 GHz

Applications: VSWR, return loss, cable loss, and distance-to-fault (DTF) analysis

Cost New:

Was:

Price Now:

$390.00 - $975.00

In Stock

ORDERING OPTIONS
RESA7G Realtime EMI Measurement Analyzer

SKU: 2075-1

Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMC

Pre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461

Frequency Range: 9 kHz - 7 GHz

Sweep/Test Speed: Fast

Amplitude Accuracy: <0.7 dB

Resolution Bandwidth: 1 Hz to 3 MHz

Cost New:

Was:

Price Now:

$695.00 - $1,395.00

In Stock

ORDERING OPTIONS
LNA18G Low Noise Wideband Preamplifier 1 - 18 GHz

SKU: 7125

Nominal Frequency Range: 1 - 18 GHz

Useable Frequency Range: 0.5 - 20 GHz

Connectors: 50 Ω N/SMA

Noise Figure: 2 dB

Gain: Typ. 30 dB +/- 5 dB

Max. Input Power: -10 dBm (97 dBµV)

SWR typ.: <2

Applications: Radiated Emissions, Military & Aviation EMC Testing

Cost New:

Was:

Price Now:

$450.00 - $4,500.00

Typically In Stock

ORDERING OPTIONS
Rohde & Schwarz NRP-Z11 Power Sensor

SKU: 6677

Frequency Range: 10 MHz to 8 GHz

RF Connector: N-Type (male)

Power Measurement Range: -67 dBm to +23 dBm

Max Average Power: 0.4 W (+26 dBm) continuous

Cost New:

Was:

Price Now:

$380.00 - $3,800.00

In Stock

ORDERING OPTIONS
ETS-Lindgren 7405-907BN Broadband Preamplifier

SKU: 8263

Frequency Range: 100 kHz - 3 GHz

Accessories: AC Adapter

Connectors: N-Type female

Max Input: +20 dBm

Applications: EMI Precompliance Testing, Emissions Measurements, CE Marking

Test Standards: CISPR 11, CISPR 32, FCC Part 15

Cost New:

Was:

Price Now:

$295.00 - $2,950.00

In Stock

ORDERING OPTIONS
Keysight N9010A-526 Spectrum Analyzer Rental

SKU: 12083

Max Frequency: 26.5 GHz

Min Frequency: 9 kHz

Sweep/Test Speed: Fast

Resolution Bandwidth: 1 Hz to 3 MHz

Options: 526, EMC, EP3, FSA, P03, YAS, and WIN7

Cost New:

Was:

Price Now:

$1,250.00

Typically In Stock

ORDERING OPTIONS
AH18G Active Horn Antenna for Radiated Emissions to 18 GHz

SKU: 2363

Applications: Radiated Emissions, Military & Aviation EMC Testing

Test Standards: FCC Part 15, MIL-STD-461

Gain: 30 dB

Max Input Power: -10 dBm (97 dBµV)

Power: Battery Operated & USB Charger

Connector: N-type (to Analyzer/Receiver)

Cost New:

Was:

Price Now:

$695.00 - $8,975.00

IN STOCK

ORDERING OPTIONS
ECO500M 500 MHz Oscilloscope, Pre-Programmed for Waveform Measurements

SKU: 12157

1 review

Bandwidth: 500 MHz

Trigger type: Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video, Qualified, Nth edge, Setup/hold, Delay, Serial

Peak detect: 200 ps

Sequence: Up to 80,000 segments, interval between triggers = 1.3 μs min.

Channels: 4

Applications: How to Capture an Electrical Transient Using an Oscilloscope

Cost New:

Was:

Price Now:

$29.00 - $395.00

In Stock

ORDERING OPTIONS