RF Test Equipment

RF Test Equipment Test Equipment, Systems & Solutions

• 

  Tektronix DPO4054 Digital Oscilloscope, 4 Channels, 500 MHz

  SKU: 30047

  Bandwidth: 500 MHz

  Channels: 4

  Maximum Waveform Capture Rate: 3,700 wfms/s

  Sample Rates: Up to 5 GS/s on All Channels

  Applications: How to Capture an Electrical Transient Using an Oscilloscope, EMC Precompliance Testing

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Teseq PMU 6003 USB Power Meter/Sensor 9 kHz - 3 GHz

  SKU: sku-606

  Current rating: 100 mA at 5 V

  Frequency Range: 9 kHz – 3 GHz

  RF Connector: N male 50 Ω

  Standards Met: IEC/EN 61000-4-3 IEC/EN 61000-4-6

  Supply Voltage: min. 4.7 V / max. 9 V

  VIEW PRODUCT Cart

• 

  AH Systems SAC-40G-1.5 RF Cable, Up to 40 GHz, 2.9mm Cable Connectors, 1.5 Meter Length

  SKU: sku-569

  RF Connector: 2.9mm

  VIEW PRODUCT

• 

  Keysight N5183A Microwave Analog Signal Generator

  SKU: KEY-N5183A

  Frequency Range: 100 kHz - 20, 32 or 40 GHz

  Options: Mechanical attenuator, fast switching speed

  Includes: 2.92mm Adapter, Power Cord, Calibration

  Frequency Resolution (0.01Hz): -107dBc/Hz at 20kHz offset from 3GHz carrier

  Interfaces: GPIB, LAN, USB and others

  Cost New:

  Was:

  Price Now:

  $1,250.00 - $2,975.00

  Multiple Configurations In Stock

  ORDERING OPTIONS

• 

  Rohde & Schwarz SMA100A-B106L 9 kHz to 6 GHz Signal Generator w/ Opt B81

  SKU: 7213

  Frequency Range: 9 kHz to 6 GHz

  Connector: BNC Female

  Source Impedance: 50 Ω (nom.)

  Input Level Range: –6 dBm, ≤ 19 dBm

  Input Voltage: –10 V to +10 V

  Options: B106L, B81

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  PMM (Narda) 6630 USB RF Power Sensor 9 KHz - 3 GHz, 1 W

  SKU: sku-470

  Weight: 0.12 kg

  Dimensions: 30 x 30 x 95 mm

  General Data: Technical Details

  RF Field Probe Connector: N male, 50 Ω

  RF Field Probe Frequency Range: 9 kHz to 3 GHz

  RF Field Probe Max SWR: 10 kHz to 300 kHz 1,10 from +30 dBm to -9 dBm 300 kHz to 100 MHz 1,05 100 MHz to 1 GHz 1,10 1 GHz to 3 GHz 1,25 10 kHz to 3 GHz 1,20 from -9 dBm to -40 dBm

  RF Field Probe Maximum Input Power: 2 W peak envelope max 300 ms

  RF Field Probe Measurement Accuracy: less than 0,35 dB

  RF Field Probe Power Linearity: -40 dBm to +30 dBm @ 50 MHz 0,2 dB

  RF Field Probe Power Measurement Range: 100 nW to 1 W (-40 dBm to +30 dBm)

  RF Field Probes: Power Sensor

  Supply Voltage: 5 Volt DC – 100 mA (from USB Port)

  VIEW PRODUCT Cart

• 

  Rent IFI CDD1G Directional Coupler for EMC Applications 10 kHz - 1000 MHz, 100 W

  SKU: sku-469

  Weight: 1.0 lb

  Coupling: EMC Applications

  Coupling factor: 40 dB

  Frequency Range: 10 kHz to 1 GHz

  General Data: Technical Details

  Impedance: 50 Ω

  Power, nominal: 100 W

  VIEW PRODUCT

• 

  AH Systems PAM-0204 Preamplifier, 20 MHz - 4 GHz, 24 dB

  SKU: 10249

  Weight: 1.1 lbs. / 0.5 kg

  Application/Test Type: Improve overall system sensitivity for field measurements.

  Connector: N(f) to N(f)

  Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

  Frequency Range: 20 MHz - 4 GHz

  Gain: 26 dB typical (22 dB minimum)

  Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

  VSWR: 2.0:1 Input; 1.7:1 Output

  Cost New:

  Was:

  Price Now:

  $550.00

  Typically In Stock

• 

  AH Systems SAC-210 RF Cable Up to 5 GHz, BNC(m) to BNC(m)

  SKU: sku-234

  RF Connector: BNC(m) to BNC(m), RG-58

  VIEW PRODUCT

• 

  AH Systems PAM-1840VH High Gain Broadband Preamplifier, 18 - 40 GHz

  SKU: sku-213

  Weight: 1.1 lbs. / 0.5 kg

  Application/Test Type: Overcome attenuation problems at higher frequencies. Match to double ridge guide horn antenna.

  Connector: 2.9mm(f) to 2.9mm(f)

  Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

  Frequency Range: 18 GHz - 40 GHz

  Gain: 37 dB typical (33 dB minimum)

  Input: 100/220 VAC regulated P/S output: 12 VDC 275 mA

  Maximum Continuous Power: +8 dBm @ 1 dB compression

  VSWR: less than 2.9:1 typical

  VIEW PRODUCT Cart

• 

  AH Systems PAM-1840 High Frequency Broadband Preamplifier, 18 - 40 GHz

  SKU: sku-212

  Weight: 1.1 lbs. / 0.5 kg

  Application/Test Type: Overcome attenuation problems at higher frequencies.

  Connector: 2.9mm(f) to 2.9mm(f)

  Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

  Frequency Range: 18 GHz - 40 GHz

  Gain: 20 dB typical (15 dB minimum)

  Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

  Maximum Continuous Power: +6 dBm @ 1 dB compression

  VSWR: less than 1.7:1 typical

  VIEW PRODUCT Cart

• 

  AH Systems PAM-1826 High Frequency Preamplifier, 18 - 26.5 GHz

  SKU: sku-211

  Weight: 1.1 lbs. / 0.5 kg

  Application/Test Type: EMI Precompliance Testing Emissions Measurements, CE Marking

  Connector: SMA(f) to SMA(f)

  Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

  Frequency Range: 18 GHz - 26.5 GHz

  Gain: 32 dB typical

  Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

  Maximum Continuous Power: +6 dBm @ 1 dB compression

  VSWR: 1.7:1 typical

  EMC Standards: CISPR 11, CISPR 32, FCC Part 15

  VIEW PRODUCT Cart