EM Absorbing Clamps Test Equipment, Systems & Solutions
-
Schwarzbeck MDS 21 CISPR 16 Absorbing Clamp
SKU: 11781
Max Cable Diameter: 20mmMax Current Handling: 30 AmpsMax RF Power Handling: 5 WattsFrequency Range: 30 MHz - 1 GHzTest Standards: CISPR 16Cost New:$4,950.00Was:$4,950.00$3,500.00In Stock -
AD-CISPR16-1-4 Ferrite Clamp for Radiated Disturbance Measurements
SKU: 11225
Standards Met: CISPR 16-1-4Frequency Range: 30 MHz to 1 GHzDiameter: 1.25"Applications: Decoupling and noise suppression, Electromagnetic absorption clamp$3,095.00IN STOCK -
Teseq FT 801 Ferrit Tube EM Decoupling Clamp, 150 kHz to 1 GHz, 35 mm Cable Diameter
SKU: sku-673
Weight: approx. 8 kgApplication/Test Type: decoupling network (ferrite tube) for immunity test according to IEC / EN 61000-4-6Dimensions: 670 mm x 70 mm x 80 mmFrequency Range: 150 kHz to 1000 MHzMax. Cable Diameter: 35 mmStandards Met: IEC/EN 61000-4-6 CISPR 24 EN 61000-6-1 EN 61000-6-2 IEC 60533 IEC 60601-1-2 IEC 61326 -
Teseq AMZ 41A Absorbing Clamp for CISPR 13 & 14, w/ LE 210 RF Cable
SKU: sku-568
Weight: approx. 7 kgApplication/Test Type: Disturbance power measurements of coaxial cables, automotive screened components (eg motor ignition systems and sheath current on aerial cables.Clamp factor (CF): -4 dB to +5 dBCurrent Rating: 25 Amps MaxDecoupling factor DF: Greater than 21 dBDecoupling factor DR: Greater than 30 dBDimensions: W x D x H: 665 mm x 120 mm x 105 mmFrequency Range: 30 MHz to 1000 MHzIsolated lines under test: Power supply lines and other connecting linesMax. Cable Diameter: 20 mm inner (10 mm with adapter)Maximum Continuous Power: 10 WattsMin. site attenuation: 13 dB to 22 dBRF Connector: BNC, 50 ΩStandards Met: CISPR 13, CISPR 14-1, CISPR 16-1-5, CISPR 16-2-2 -
Teseq MDS 21B EMC Absorbing Clamp for Disturbance Power Measuring, w/ 6 dB Attenuator & RF Cable
SKU: sku-559
Weight: approx. 6.3 kgCurrent Rating: 30 ADimensions: 610 mm x 115 mm x 80 mmFrequency Range: 30 MHz to 1000 MHzImpedance: 50 ΩRF Connector: N, female -
Com-Power CLA-150 32mm Absorbing Clamp CISPR 14
SKU: 1551
Test: CISPR 14Application/Test Type: Conducted Emissions, Radiated EmissionsClamp factor (CF): -3 dB to +4 dBDimensions: 627 x 114 x 165 mm (24.7 x .4.5 x 6.5 inches)Frequency Range: 30 MHz to 1000 MHzIsolated lines under test: Power supply lines and other connecting linesMax. Cable Diameter: 32 mm (1.26 inches)Min. site attenuation: 14 dB to 21 dBRF Connector: BNC (f), 50 Ohms$595.00Inquire for Availability -
Com-Power CLA-050 10mm Absorbing Clamp
SKU: sku-265
Weight: 5 kg (11.5 lbs)Aperture: 12.7 mm (0.5 inches)Application/Test Type: Measurement of direct field strength from EUT supply cablesClamp factor (CF): -3 dB to +4 dBDimensions: 627 x 114 x 144 mm (24.7 x .4.5 x 5.7 inches)Frequency Range: 30 MHz to 1000 MHzIsolated lines under test: Power supply lines and other connecting linesMax. Cable Diameter: 10 mm (0.39 inches)Min. site attenuation: 14 dB to 21 dBRF Connector: BNC (f), 50 OhmsStandards Met: CISPR 14 -
Teseq CMAD 20B Common Mode Absorption Device, 1 MHz to 1 GHz, up to 20 mm Cable
SKU: sku-141
Weight: approx. 3.4 kgDimensions: (LxWxH): 670 mm x 78 mm x 58 mmFrequency Range: 1 MHz to 1 GHzMax. Cable Diameter: 20 mmStandards Met: IEC/EN 61000-4-20; CISPR 13; CISPR 14-1; CISPR 15; CISPR 16-1-4; CISPR 16-2-3; CISPR 22; CISPR 32; EN 61000-6-3; EN 61000-6-4; IEC 60533 -
Teseq CMAD 10 Common Mode Absorption Device for CISPR 22
SKU: sku-140
Weight: approx. 1.7 kgApplication/Test Type: Disturbance mode testing ideal for GTEM test cells for radiated emission and immunity testing.Dimensions: (LxWxH): 293 mm x 63 mm x 40 mmFrequency Range: 30 MHz to 1000 MHzStandards Met: IEC/EN 61000-4-20 -
Teseq KEMA 801A RF Attenuation Clamp/Decoupling Network for IEC 61000-4-6
SKU: sku-122
Weight: approx. 5.5 kgDimensions: 670 mm x 100 mm x 79 mmFrequency Range: 150 kHz to 1000 MHzMax. Cable Diameter: 20 mmStandards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326 -
INQUIRE -
Typically In Stock