AR 350S1G6 Overview
The EMC Shop is the only distributor stocking the Amplifier Research 350S1G6 RF amplifier. The highest power amplifier (350 Watts) covering the band 700 MHz to 6 GHz available for immediate shipment. When paired with a high power gain horn antenna, achieve field strength levels beyond commercial, automotive or miltary test requirements.
[split]
Achieve Field Strength Levels:
- 1 Meter = 350 V/m
- 3 Meters = 120 V/m
- 10 Meters = 30 V/m
Specifications of the Amplifier Research 350S1G6 include:
- RATED POWER OUTPUT: 350 watts minimum (0.7–6.0 GHz)
- INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
- POWER OUTPUT @ 3dB COMPRESSSION
- Nominal 370 watts
- Minimum 315 watts
- POWER OUTPUT @ 1dB COMPRESSION
- Nominal 300 watts
- Minimum 250 watts
- SMALL SIGNAL GAIN FLATNESS: ±1.5 dB typical; ±2.5 dB maximum
- FREQUENCY RESPONSE: 0.7–6 GHz instantaneously
- GAIN (at maximum setting): 58 dB minimum
- GAIN ADJUSTMENT: (Continuous Range) 10 dB minimum, 4096 steps remote
- INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
- OUTPUT IMPEDANCE: 50 ohms, nominal
- MISMATCH TOLERANCE* 100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.
- MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse Modulation appearing on the input signal
- THIRD ORDER INTERCEPT: 63 dBm typical
- NOISE FIGURE: 10 dB typical
- HARMONIC DISTORTION: Minus 20 dBc maximum at 250 watts, (0.7-6.0 GHz)
- SPURIOUS: Minus 73 dBc Typ.
- PHASE LINEARITY: ±1.0 deg/100 MHz, Typ
- PRIMARY POWER (Selected Automatically): 200-260 VAC; 50/60 Hz, single phase; 3800 watts maximum
- CONNECTORS
- RF (Input & Output) See Model Configurations
- REMOTE INTERFACES
- IEEE-488 24 pin
- RS-232 9 pin Subminiature D
- RS-232 (fiber optic) Type ST
- USB 2.0 Type B
- Ethernet RJ-45
- SAFETY INTERLOCK: 15 pin Subminiature D
- COOLING: Forced air (self contained fans)
- EXPORT CLASSIFICATION: 3A001
