Rohde & Schwarz FSP30 Overview
The Rohde FSP30 spectrum analyzer is a suitable precompliant conducted emissions tool. It's wide frequency from 9 kHz to 30 kHz allows coverage for any military, avionics or commercial test standards.
Rohde FSP30 Features:
- Resolution bandwidth 1 Hz to 10 MHz
- Displayed average noise level -155 dBm (1 Hz)
- Phase noise -113 dB (1 Hz) at 10 kHz
- Total measurement uncertainty 0.5 dB
- Measurement routines for TOI, ACP(R), OBW, CCDF, APD, etc. as standard
- Resolution bandwidth: 1 Hz to 10 MHz
- Displayed average noise level: -155 dBm (1 Hz)
- Phase noise: -113 dB (1 Hz) at 10 kHz
- Additional filters: Channel filters from 100 Hz to 5 MHz and RRC filters, FFT filters from 1 Hz to 30 kHz, EMI bandwidths and quasi-peak detector
- Measurement functions for TOI, MC ACP(R), OBW, CCDF, APD, etc
- Measurement applications for cellular standards and general purpose, e.g. phase noise, noise figure, etc.
- DANL typ.: -155 dBm (1 Hz) w/o preamp
- Phase-noise typ.: -113 dBc/Hz @ 10 kHz offset, CF 500 MHz
- Phase-noise typ.: -145 dBc/Hz @ 10 MHz offset, CF 500 MHz
- TOI typ.: 10 dBm
- 1-dB-compression point: 0 dBm
- 0.5 dB total level uncertainty up to 3.6 GHz
- <0.2 dB linearity error down to -70 dB
- IF digitizer 12 bit 32 MHz (20.4 MHz IF)
- IQ memory 2x128 ksamples
- 2.5ms sweep time in frequency domain
- 1 µs sweep time in time domain
- Up to 70 remote measurements/s via GPIB
- Up to 80 manual measurements/s (screen update)
