RF Field Strength Meters

RF Field Strength Meters Test Equipment, Systems & Solutions

• 

  Lumiloop LSProbe 1.2 Laser Powered Field Probe for CW and Pulse Testing

  SKU: 7384

  Application/Test Type: Radiated Immunity, Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms

  Field Strength Range: 0.1 V/m to 1,000 V/m (7 to 10 kV/m under 30 MHz)

  Frequency Range: 10 Hz to 8.2 GHz

  Resolution: <0.01 V/m

  Test Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20

  Typically In Stock

  View Product Cart

• 

  Anritsu MS2090A Real-time Handheld Spectrum Analyzer

  SKU: 8840

  Frequency Range: 9 kHz - 43.5 GHz

  Analysis Bandwidth: 110 MHz

  Resolution bandwidth (RBW): 1 Hz to 10 MHz

  Real-Time Spectrum Analysis bandwidth:: 22, 55, 110 MHz (option dependent)

  Amplitude Accuracy: ± 0.5 dB, typical

  Standard Cable Length: 1 Meter

  Applications: RF Interference Analysis and EMF Sniffing and Much More

  Cost New:

  Was:

  Price Now:

  $1,895.00

  Typically In Stock

  Ordering Options

• 

  ETS-Lindgren FP5083 Isotropic Electric Field Probes

  SKU: 5972

  Dynamic Range: 3 to 300 Volts/meter (V/m)

  Frequency Response: 80 MHz - 26 GHz (± 1.5 dB), 26 GHz - 40.0 GHz (± 3.0 dB)

  Ranges: 10, 30, 100, 300 V/m full scale

  Average Overload: 6 times full scale (each range)

  Battery Life: 17 Hrs continuous (full charge)

  Cost New:

  Was:

  Price Now:

  $995.00

  Typically In Stock

  Ordering Options

• 

  Narda Broadband E-Field Meter Kit, 100 kHz - 50 GHz

  SKU: sku-885

  Weight: 10.6 oz.

  Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.

  Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAh

  Dimensions: 1.5 x 2.0 x 8 inches

  Frequency Range: 100 kHz - 60 GHz

  Operation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)

  Recharging Time: 2 hours

  Standards Met: IEC/EN 61000-4-3

  Cost New:

  Was:

  Price Now:

  $595.00

  Typically In Stock

  Ordering Options

• 

  PMM (Narda) EMR-300 Broadband RF Survey Meter, 3 kHz to 60 GHz

  SKU: sku-611

  Weight: 450 g

  Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.

  Battery: 2 ea. AA type, re-chargeable batteries

  Dimensions: 96x64x465 mm

  Frequency Range: varies on probe

  Operation Time: 8 hours (typical)

  Probe Holder Tip: BNC

  Recharging Time: re-charged via supplied charger

  RF Field Probes: E-Field

  Standards Met: IEC/EN 61000-4-3

  View Product Cart

• 

  PMM EP-604 300 kHz – 26.5 GHz Broadband Active Electric Field Probe

  SKU: 8554

  Application/Test Type: Monitoring Electric Field Strengths

  Field Strength Range: 0.4 - 800 V/m (0.01 V/m)

  Frequency Range: 300 kHz to 26.5 GHz

  Standards Met: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20

  Interfaces: Fiber-Optic

  Typically In Stock

  View Product Cart

• 

  Wavecontrol SMP3 RF Field Meter

  SKU: SMP3

  Frequency Range: DC to 60 GHz

  Battery Life: >24 Hours

  Readout Values: Total field (instantaneous, max., min. and average) Field components (X, Y, Z)

  Measurement Range: 0.2 - 1000 V/m

  High Pass Filters: 1 Hz, 10 Hz, 25 Hz and 100 Hz

  Probe Selection: E & H Field (DC - 60 GHz)

  More Features: Long and Short Term Recoding Options, Peak and RMS, Many more.

  Ships within 24 hours.

  View Product Cart

• 

  EMF & RF Selective Frequency Analyzer Kit

  SKU: 18505

  Frequency Range: 10 MHz to 18 GHz

  Resolution Bandwidths: 100 Hz to 1 MHz

  Detectors: sample, max/min peak, auto peak, RMS

  Reference Level: –80 dBm to +20 dBm

  Applications: RF Interference Analysis and EMF Sniffing

  Cost New:

  Was:

  Price Now:

  $975.00

  In Stock

  Ordering Options

• 

  Narda NBM-520 Broadband Field Meter, 100 kHz - 60 GHz

  SKU: 6278

  Measurement Units: V/m, A/m, mW/cm² or W/m², % for shaped probes

  Battery Life: 20 hours

  Recharging Time: 2 hours

  Calibration Status: NIST (5/22/2023)

  PC Interface: Fiber Optic via USB (6 ft cable)

  Software: NBM-TS, Tile, EMCWare, EMC32

  Videos: Software Setup

  Cost New:

  Was:

  Price Now:

  $450.00

  In Stock

  Ordering Options

• 

  Narda SRM-3000 Selective Radiation Meter

  SKU: 5773

  Frequency range: 100 kHz to 3 GHz

  Modes: Spectrum Analysis Safety Evaluation, UMTS – P-CPICH Demodulation Time Analysis

  Upper limit of measurement range (MR): -27 dBm to +23 dBm (in steps of 1 dB)

  Display range: From noise floor up to +26 dBm

  Maximum RF power: +30 dBm

  Applications: RF Interference Analysis and EMF Sniffing

  Intrinsic noise: -120 dBm for 1 kHz RBW, f > 20 MHz and no RF attenuation

  RF Input Type: N connector, 50 Ω

  Cost New:

  Was:

  Price Now:

  $495.00

  In Stock

  Ordering Options

• 

  Narda FieldMan 0 Hz to 90 GHz All-in-One Electromagnetic Field Meter

  Frequency Range: 0 Hz (DC) to 90 GHz

  Display type: Sunlight readable 5” color TFT-LCD anti-glare display (HD 1280 x 720 pixels)

  Brightness: Manual control or automatic control via brightness sensor

  Fast data transmission: Optical interface, Ethernet, USB-C

  Operating languages: Largely language-independent measurement control via symbols. Menu languages: English, German, more are planned.

  View Product Cart

• 

  Narda EHP-50C Electric and Magnetic Field Analyzer, 5 Hz - 100 kHz

  SKU: 4263

  Weight: 25 g

  Battery: rechargeable battery

  Communication: Bidirectional fiber optic link

  Dimensions: 92 x 92 x 109 mm

  Frequency Range: 5 Hz to 100 kHz

  Measurement Mode: X-Y-Z axis simultaneous sampling

  Operation Time: 10 hours in normal mode 150 hours in low power mode

  PC Software: Included CD

  Recharging Time: 4 hours

  RF Field Probes: E & H Field

  Sensors: Three (Narrowband, Broadband and Marker

  Typically In Stock

  View Product Cart