DC/Low Frequency High Power Amplifiers Test Equipment, Systems & Solutions
-
AE Techron 7234 Industrial Power Amplifier/Battery Simulator
SKU: 4302
AC Power Adapter: Single phase, 120 VAC, 60 Hz, 20A service; (220-240 VAC, 50-60 Hz, 10A service model available)Frequency Range: DC—300 kHz (1 watt): +1 to -2.0 dBGain: Voltage Mode: 20 volts/volt Current Mode: 5 amperes/voltImpedance: 20k ohm differentialMax input power: ±10V, balanced or unbalancedOperating Temperature: 10°C to 50°C (50°F to 122°F), maximum output Power de-rated above 30°C (86°F).Output Impedance: 5.3 mΩ in series with 0.95 µHOutput voltage: ±150 VpApplications: Radiated Immunity$595.00Typically In Stock -
AE Techron 7224 Linear Power Amplifier
SKU: 6792
Test Standards: DO 160 Section 16, 18, 19, SAE J113, ISO 16750-2, MIL-STD-461Frequency Range: DC - 300 kHzGain: Voltage Mode: 20 volts/volt Current Mode: 5 amperes/voltImpedance: 20k ohm differentialMax input power: ±10V, balanced or unbalancedOutput Impedance: 5.3 mΩ in series with 0.95 µHOutput voltage: ±150 VpTypically In Stock -
E&I / ENI 2200L Class A Linear RF Power Amplifier
SKU: 0725
AC Input: 104 – 240 Volts 8.4 A @ 120 V4.2 A @ 240 VFrequency range: 10 KHz to 12 MHzGain: 53 dB (nominal)Gain Flatness: +/- 1.5 dBInput Power for Rated Pout: 1 mWOutput Impedance: 50Ω / 2:1 maximumProtection: Input: Unit will withstand input signal of +13 dBm without damage (1.0 V rms) max. and infinite load VSWR.Rated Power Output: 200 Watts (P1dB)$995.00In Stock -
Amplifier Research 40AD1 DC - 1MHz RF Power Amplifier
SKU: 4272
Output Power: ~50 WattsFrequency Range: DC - 1 MHzApplications: Radiated ImmunityMax. Gain: 45 dB minimumInput for Rated Output: 1.0 milliwatt maximumInput Impedance: 50Ω; VSWR 1.5:1 maximumOutput Impedance: 50Ω; VSWR 2.0:1 maximumInquire for Availability -
E&I / ENI 325LA 25W, 250 kHz - 150 MHz RF Amplifier
SKU: 6082
Frequency range: 250 kHz to 150 MHzRF Power Amplifier: 250 kHz to 150 MHzOutput Power: 25 WGain (nominal): 50 dBImpedance: 50 OhmInput/Output: BNC(f) connectors$7,450.00In Stock -
Schwarzbeck LFPA 9733 Power Amplifier 5Hz - 1MHz
SKU: 30019
Frequency Range: 5 Hz – 1 MHzGain (without load): 26 dB ±3 dBAC Impedance of load min: 0.25 ΩTypical input impedance: 1 kΩApplications: Radiated ImmunityInquire for Availability -
E&I / ENI 3100LA Class A Linear RF Power Amplifier
SKU: 4343
Connectors: NCooling: Forced AirFrequency range: 250 kHz - 150 MHzGain: 55 dB nominalOutput: 100 Watts P1dBRF Input Voltage: 1 mW$17,500.00In Stock -
Schwarzbeck NFPA 9730 Power Amplifier DC - 250 kHz
SKU: 30020
Frequency Range: DC to 250 kHzGain at 8 Ω impedance: 28 ArmsContinuous Operating Current (AC): 0.25 Ω @ AC>15 HzDC Max. Current Output: 20 A (Load impedance 1.0 Ω min.)Input Resistance (typical): 1 kΩInput Connector: BNCOutput Connector: Wing terminalsApplications: Radiated ImmunityInquire for Availability -
E&I / ENI 403LA 3W, 150 kHz - 300 MHz RF Amplifier
SKU: E&IENI-403LA
Frequency Coverage: 150 kHz – 300 MHzClass of Operation: Class ARated Power: 3.0 WattsSaturated Power: 8 WattsPower Gain: 37 dB nominalTemperature Range: 0° – 45° CCooling: Forced AirRF Input Signal: AM, FM, SSB, PulsedIn STOCK -
Solar Solid State Amplifier 6552-1A 10 Hz - 100 kHz, 100 Watts for MIL-STD-461A/462
SKU: 4621
Input Impedance: 500 - 600 ohmsOutput Power: 100 watts at 1 KHz into 2.4 ohmsOutput Impedance: 2.4 ohmsOutput Voltage: 16 volts r.m.s. at 1000 Hz into 2.4 ohms (non-inductive)