3-Phase Surge CDN's

3-Phase Surge CDN's Test Equipment, Systems & Solutions

• 

  3ctest SPN Series CDN's for Lightning Surge, Single Phase 3-wire, Three Phase 5-wire

  SKU: sku-563

  Weight: approx. 50Kg

  Dimensions: 19 inch/6U

  Impedance: 2 ohm (output)

  Polarity: +/-/alternative

  Voltage: 0.2kV–6kV，±10%

  Inquire for Availability

  View Product Cart

• 

  3ctest SEPN Series CDN's for Surge & Burst, Single Phase 3-wire, Three Phase 5-wire

  SKU: sku-561

  Polarity: +/-

  Weight: approx. 50Kg

  Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

  Burst frequency: 0.1kHz–1000kHz

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Dimensions: 19 inch/6U

  Impedance: 2 ohm (output)

  Oscillation Frequency: Current waveform: Front time: 8us±20%, time to half value: 20us±20%

  Polarity-2: +/-/alternative

  Pulse amplitude: 0.25 kV -4.8kV, ± 10%

  Pulse current (short circuit): 0.1kA–3kA，±10%

  Voltage: 0.2kV–6kV，±10%

  View Product Cart

• 

  Teseq CDN 3063-S63 3 Phase, 63 Amp Automated Surge CDN Coupler for NSG 3040/3060

  SKU: sku-218

  Weight: 100 kg (220.5 lb)

  Application/Test Type: Automated Surge Testing for EUT up to 63 Amps, 480 VAC; Three phase (5 wire); Two phase (4 wire); Single phase (3 wire)

  Current Rating: 3 x 63 Amp continuous (peak 3 x 100 Amp for 30 min.)

  Dimensions: 570 x 840 x 630mm (22.4 x 33 x 24.8")

  Frequency Range: DC – 65 Hz with no loss, 400 Hz max. with power loss

  Mains & EUT Connections: HV-surge pulse input from generator (Fischer connector); Connector for EUT supply input (Screw terminals Phoenix); Connector for EUT supply output (Screw terminals)

  Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45 standard, in IEC / EN 61000-4-12:2006 and ANSI C62.41

  Voltage Rating: EUT VAC line to line: 30 to 480 VAC rms; EUT VAC line to ground: EUT VAC 30 to 280 VAC rms, (below 30 V synchronisation not guaranteed, asynchronous mode only); EUT VDC: up to 125 VDC – full current range, up to 225 VDC – up to 7 A

  Inquire for Availability

  View Product Cart

• 

  Teseq CDN 3063-S100 Automated Surge CDN Coupler - 3 Phase, 100 Amp, 480 Volts

  SKU: sku-219

  Application/Test Type: Automated Surge Immunity Testing

  Current Rating: 3 x 100 Amp continuous (peak 3 x 150 Amp for 30 min.)

  Mains & EUT Connections: HV-surge pulse input from generator (Fischer connector); Connector for EUT supply input (Screw terminals Phoenix); Connector for EUT supply output (Screw terminals)

  Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45, IEC / EN 61000-4-12:2006 and ANSI C62.41

  Voltage Rating: 480 VAC rms Line to Line

  Inquire for Availability

  View Product Cart