Categories
Test Equipment, Systems & Solutions
-
-
Haefely DEC 6 Decoupling Network for Symmetrical Data and Control Lines
SKU: sku-409
Weight: approx. 2 kg netCoupling: Decoupling elements Resistors 200 OhmDimensions: 30 x 20 x 16 cm (w x h x d)DUT current: Current on EUT lines max. 0.1APulse amplitude: max. 6.6kVPulse Shape: 10/700us -5/320us 1.2/50us - 8/20us 100kHz ring waveTest Voltage: Voltage on EUT lines max. 72V DC or 50V AC,RMS (with gas arrestors as protection elements) max. 144V DC or 100V AC,RMS (with ABDs as protection elements)In Stock -
Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs
SKU: 10161
Weight: 550 grams (1800 grams with storage case)Application/Test Type: 1000BaseT and Power Over Ethernet (PoE) testing of 1 up to 4 pair(s) of unscreened balanced communication linesCommon Mode Impedance: 150 Ω ±20 ΩCurrent Rating: 600 mA (line), 1200 mA (pair)Decoupling of Common Mode Disturbance: ≥35 dB to ≥55 dB/≥55 dBDimensions: 10.5 cm x 6.5 cm x 11.0 cm (19.0 cm with adapter plugged in)Frequency Range: 150 kHz to 30 MHzMains & EUT Connections: Adapter Set includes RJ11, RJ45, LCL and more.RF Connector: BNC 50 ΩRF Input Voltage: 15 V maxStandards Met: CISPR 15; CISPR 16-1-2; CISPR 16-2-1;CISPR 22; CISPR 32; EN 61000-6-3; EN 61000-6-4Voltage Division Factor: 10 dB ±1 dBVoltage Rating: 63 Volts AC, 100 Volts DC (line to ground); Test Voltage: 200VDC, 2 seconds -
PMM L3-64 3-Phase, 64 Amp LISN for FCC Part 15
SKU: sku-57
Weight: 50 kg (110 pounds)Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.Current Rating: 63 Amps MaxDimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)Frequency Range: 9 kHz to 30 MHzInductors: 50 Ω // [5 Ω + 50 µH] with 250 µH chokeMains & EUT Connections: 63 A IEC connectorRF Connector: BNC (f)Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461FVoltage Rating: 230 Volts AC, 325 Volts DC (Line to Power Earth and Neutral to Power Earth); 400 Volts AC, 565 Volts DC (line to line and line to neutral)CISPR 16-1-2: YesDO-160F: YesCISPR 22: YesFCC: YesANSI C63.4: Yes -
-
Schwarzbeck NNHV 8123-200 CISPR25 Artificial Mains Network (AMN)
SKU: 21156
Applications: Conducted Emissions, BCI Testing , Automotive EV EMCTest Standards: CISPR 25, MIL-STD-461, ISO 7637Max EUT DC Voltage: 1,000 VoltsMax EUT Current: 200 AmpsMax EUT AC Voltage (60Hz/400Hz): 400V/300VInductance: 5 µHTypically In Stock -
IFI M50 10 kHz to 230 MHz, 50 Watt CW RF Amplifier
SKU: sku-831
Max Frequency: 220 MHzMin Frequency: 10 kHzOutput Power: 50 WattsApplications: RF Conducted Immunity, MedicalStandards: IEC 61000-4-6, MIL-STD 461 CS114AC Input Power: 100-240V/1PH/500VAGain: 47dB -
3ctest CWS 1000N 10kV Surge Generator for IEC/EN 61000-4-5
SKU: sku-798
Weight: Approx 44 kg (97 lbs)Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Dimensions: 19 inch/6uImpedance: 2 OhmPhase synchronization: 0°-360°, 1°step or randomPolarity: Positive, Negative, AlternatePulse current (short circuit): 0.1kA-5kA ±10%Pulse voltage (open circuit): 0.2kV - 10kV ±10%Standards Met: IEC 61000-4-5 -
3ctest SEPN Series CDN's for Surge & Burst, Single Phase 3-wire, Three Phase 5-wire
SKU: sku-561
Polarity: +/-Weight: approx. 50KgBurst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4Burst frequency: 0.1kHz–1000kHzCombination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Dimensions: 19 inch/6UImpedance: 2 ohm (output)Oscillation Frequency: Current waveform: Front time: 8us±20%, time to half value: 20us±20%Polarity-2: +/-/alternativePulse amplitude: 0.25 kV -4.8kV, ± 10%Pulse current (short circuit): 0.1kA–3kA，±10%Voltage: 0.2kV–6kV，±10% -
Teseq ISN S501A Impedance Stabilization Network for Coaxial Lines
SKU: sku-171
Weight: approx. 1.5 kgDimensions: (W x H x D): 100 mm x 100 mm x 240 mmFrequency Range: 150 kHz to 230 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 20 V -
TWT18G-250 8 GHz - 18 GHz, 250 Watt RF CW Amplifier
SKU: sku-2218
Weight: 75 lbsDimensions: 19W x 25D x 8.75HFrequency range: 8.0 – 18.0 GHzGain: 54 dBRated Power: 250 watts -
IN STOCK