EN/IEC 61000-4-12 Test Equipment

EN/IEC 61000-4-12

(Showing 8 of 8)

Overview

The EMC Shop stocks equipment used for the IEC 61000-4-12 ring wave surge immunity test.

The ring wave is an oscillatory transient induced in low-voltage cables due to switching of electrical networks and reactive loads, faults, and insulation breakdown of power supply circuits or lighting.

IEC 61000-4-12:2017 RING WAVE CHANGES

addition of a mathematical modelling of ring wave waveform
new Annex B on selection of generators and test levels
new Annex C on explanatory notes
new Annex D on measurement uncertainty
addition of high speed CDN
addition of a calibration procedure for CDN

Browse Ring Wave Generators

Ring Wave Characteristics per IEC 61000-4-12

Get Started

The EMC Shop supports all IEC 61000-4-12 testing equipment and setup.

Contact Now

EN/IEC 61000-4-12 Test Equipment, Systems & Solutions

3ctest RWS 600 Ring Wave Simulator for IEC 61000-4-12

SKU: sku-595

Display Interface: 5.7 inch TFT touch screen

Phase synchronization: 0°-360°, 1° step or random

Polarity: Positive. negative, alternating

Pulse current (short circuit): 500A ± 10% at 12Ω; 200A ± 10% at 30Ω

Pulse voltage (open circuit): 0.25 kV–6.0kV ± 10%

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Test duration: 1s-99s

4-6 Weeks

View Product Cart
Haefely PIM 110 Ring Wave Immunity System for IEC 61000-4-12

SKU: sku-544

Impedance: 12, 30 & 200 Ohms

Applications: Surge Immunity Testing

Ring Wave: 0.5us - 100kHz (voltage & current)

Pulse repetition: 12 per minute

Pulse Voltage: 0.20 – 7.8kV

Compliance Standards: IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Test duration: 5 seconds

MSRP:

Was:

Price Now:

$995.00

In Stock

Ordering Options
Haefely PIM 150 Oscillating Wave Surge Generator

SKU: 10526

Burst frequency: 100 kHz & 1 MHz

Coupling: Single & Multiple Path

Mains & EUT Connections: HV connector & CDN

Source Impedance: 200 ohms

Standards Met: IEC 61000-4-18 Power & Data lines; ANSI C37.90.1, IEC 60255-22-1, IEEE 1613

In Stock

View Product Cart
EMC Partner DOW 3000 Slow/Fast Damped Oscillatory Wave Generator

SKU: sku-414

View Product Cart
Haefely PSURGE 8000 EMC Surge Platform with Expandable PIM Modules

SKU: 11411

Applications: Surge immunity - Combo Wave, Ring Wave and Oscillatory Waves

Surge/Combination Wave: IEC/EN 61000-4-5 Ed. 1 & 2, ANSI C62.45

Ring Wave: IEC/EN 61000-4-12, IEC/EN 61000-4-5 Ed. 1 & 2, ANSI C62.45

Damped Oscillatory Wave: EC 61000-4-18, ANSI C37.90, IEC 60255-22-1, IEEE 1613

Telecom Surge: IEC/EN 61000-4-5 , ITU K-series and IEC 60950

In Stock

View Product Cart
EMC Partner MIG0603IN1 S-R Surge and Ringwave Impulse Generator

SKU: 4582

Standards Met: IEC/EN 61000-4-5, IEC/EN 61000-4-12

Applications: EMC Surge, Precompliance EMC Testing

Max EUT AC Voltage (W/ Built In CDN): 280 Volts

Max EUT AC Current (W/ Built In CDN): 16 Amps

Combination/Wave Surge Output Capability: 6 kV

External Coupling: Data Lines (Surge), 3PH EUT

MSRP:

Was:

Price Now:

$17,950.00

Inquire for Availability
Keytek E503 Ring Wave Simulator for ANSI/IEEE C62.4 and UL 864

SKU: sku-546

Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.

Pulse repetition: 1 shot/9 seconds

Pulse voltage (open circuit): 200V - 6.6kV ± 10%

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864

IN STOCK

View Product Cart
Thermo Keytek ECAT Transient Generator System

SKU: 11321

Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.

Pulse repetition: 1 shot/9 seconds

Pulse voltage (open circuit): 200V - 6.6kV ± 10%

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864

In Stock

View Product Cart