MIL-STD-461 CS115 Test Equipment

MIL-STD-461 CS115

(Showing 10 of 10)

The EMC Shop stocks test equipment to perform MIL-STD-461 CS115 conducted susceptibility testing.

MIL-STD-461 CS115 PURPOSE

Conducted Susceptibility, bulk cable injection, impulse excitation

This test procedure is used to verify the ability of the EUT to withstand impulse signals coupled onto EUT associated cabling.

MIL-STD-461 CS115 CALIBRATION SETUP

RESOURCES

MIL-STD-461 CS115 REQUIRED TEST EQUIPMENT

Pulse generator, 50 ohm, charged line (coaxial)
Current injection probe
Drive cable, 50 ohm, 2 meters, 0.5 dB or less insertion loss at 500 MHz
Oscilloscope or measurement receiver
Calibration Fixture
Current Probe
Attenuator
Coax Loads
LISNs

VIDEO DEMO MIL-STD-461 CS115 EQUIPMENT

MIL-STD-461 CS115 Test Equipment, Systems & Solutions

Noiseken INS-4040 Impulse Noise Simulator

SKU: 8882

Test Standards: IEC 61000-4-4, MIL-STD-461 CS115

Applications: EFT/Burst, EMC Precompliance, BCI Testing

Pulse Widths: 10ns, 50ns, 100ns, 200ns, 400ns, 500ns, 800ns and 1000ns

Output Voltage: 0.01~2.00kV ±10% with 50Ω Load

EUT Power Handling: AC240V Single phase, DC60V, 16A

Typically In Stock

View Product Cart
EMC Partner MIL3000 MG3 Impulse Test System for CS115 & CS116

SKU: 51331

Test Standards: CS115, CS116

Applications: RF Current Monitoring, EMC BCI Tests

Max EUT Current: 150 Amps @50/60Hz, 20 Amps @400Hz

Max Cable Diameter: <5 cm

Industry Overview: Military EMC Testing

Typically In Stock

View Product Cart
Solar 9355-1 Pulse Generator for MIL-STD 461 CS115

SKU: sku-1389

Applications: Military EMC Testing

Test Standards: MIL-STD-461 CS115

IN STOCK

View Product Cart
Noiseken INS-4020 Impulse Noise Simulator

SKU: 11048

Test Standards: IEC 61000-4-4, MIL-STD-461 CS115

Applications: EFT/Burst, EMC Precompliance, BCI Testing

Pulse Widths: 10ns, 50ns, 100ns, 200ns, 400ns, 500ns, 800ns and 1000ns

Output Voltage: 0.01~2.00kV ±10% with 50Ω Load

EUT Power Handling: AC240V Single phase, DC60V, 16A

Typically In Stock

View Product Cart
3ctest TPS-CS115 Fast Square Wave Pulse Generator for MIL-STD CS115

SKU: sku-637

Standards Met: MIL-STD-461 CS115

Burst Duration: pulse width: more than 30 ns

Pulse amplitude: 0 - 2kV

Repetition rate: 1 - 50 Hz

Supply Voltage: 220 V, 50-60 Hz

In stock

View Product Cart
BCIP400M10k Current Injection Probe for RTCA/DO-160 & MIL-STD 461

SKU: 12063

Frequency range: 10 kHz - 400 MHz

Inner diameter (I.D.): 2"

Connector type: N(f)

Maximum input power: 200 Watts

Max current field ( @400 MHz ): 500 mA

Max voltage field ( @230 MHz ): 30 Vrms

Test Standards: IEC 61000-4-6 BCI,MIL-STD-461 CS114

Rentals Typically In Stock

View Product Cart
3ctest PFS A Series Automotive Power Failure Simulator

SKU: sku-1166

Test Standards: LV 124/LV 148, LV 123

Applications: Mil-Std-461 CS115

Typically In Stock

View Product Cart
Chase CIP-8212 1 GHz BCI Probe for Conducted Susceptibility

SKU: 5787

Frequency range: 100 kHz - 1 GHz

Inner diameter (I.D.): 1.7" ( 43.8 mm )

Connector type: N(f)

Maximum input power: 100 Watts

Max current field ( @400 MHz ): 400 mA

Max voltage field ( @230 MHz ): 30 Vrms

Test Standards: ISO 11452-4, IEC 61000-4-6 BCI, DO-160 Section 20, MIL-STD-461

Cost New:

Was:

Price Now:

$4,500.00

IN STOCK
Pearson 8705C Current Probe for MIL-STD-461 CS114, CS115, CS116

SKU: sku-533

Top Frequency Range: 400 MHz

Bottom Frequency Range: 10 kHz

AC Current Handling (DC-400Hz): 800 Amps

RF Current Handling (CW/Pulse): 4 Amps / 15 Amps

Diameter: 2" ( 50.8 mm )

Transfer Impedance: - 6 dB Ω

Style: Clamp On (Fixed Window)

Applications: RF Current Monitoring, EMC BCI Tests

Test Standards: IEC 61000-4-6, DO-160, ISO 11452-4, MIL-STD-461 CS114, CS115, CS116

IN STOCK

View Product Cart
Pearson Model F-3 Calibration Fixture for MIL-STD-461 CS114, CS115, CS116

SKU: 4513

Frequency Range: 10 kHz to 400 MHz

Inner Conductor Diameter: 0.94 inches, 24 mm

Test Standards: MIL-461 CS114, MIL-461 CS115

Additional Test Standard: MIL-461 CS116

In Stock

View Product Cart