EN/IEC 61000-4-29 Test Equipment, Systems & Solutions
-
Elektro-Automatik PS 11500-30 Programmable High Efficiency DC Power Supply 1500 V
SKU: 7287
Voltage range: 0-1500 VCurrent Range: 0 -30 AResistance Range: 1.7 Ω - 3000 ΩOutput Capacitance: 60 µFFrequency Range: 45 - 65 Hz$1,400.00In Stock -
Sorensen SGA160/63 Programmable Precision High Power DC Power Supply
SKU: sku-2249
Max Voltage: 160 VoltsMax Current: 63 AmpsTotal Power: 10 kWInput Power: 220V/1PHRENTAL ONLY -
Sorensen SGA600-50D Programmable DC Power Supply Rental
SKU: sku-2167
Max Voltage: 600 VoltsMax Current: 50 AmpsTotal Power: 30 kWInput Power: 480V/3PH -
Schloder VIS 1700 Voltage Interruption Simulator
SKU: sku-784
Communication: BNC outputs (on rear) for voltage, current and scope triggeringCoupling: BNCDips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29General Data: Technical DetailsMains & EUT Connections: 4mm banana lineOutput Current: AC max. 280 V, DC max. 3 6 0 VPeak inrush current capability: 16 AmpsPhase synchronization: at any phase position 0° - 360 °Test duration: 0.1sec - 9990sec, furthermore single event and continuous operationTest Voltage: AC max. 280 V ,DC max. 3 6 0 VApplications: EMC Precompliance Testing, Conducted ImmunityTypically In Stock -
3ctest PFS 2216SVD Single Phase Power Fail Simulator w/ Two Semiconductor Switches for High Current Protection
SKU: sku-591
Weight: 40KgCommunication: Ethernet LAN、RJ45Coupling: BNCDimensions: 19 inch/6UDips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29Frequency: 45-65HzGeneral Data: Technical DetailsInput: BNC,5V TTLMains & EUT Connections: 4mm banana lineMaximum Continuous Power: 100WOutput Current: 16A AC/DC continuous current; 20A continuous 5s 40Acontinuous 3sPeak inrush current capability: 500 AmpsPhase synchronization: 0°- 360°,1° step or randomRepetition time: 0.3-9999 cycle or 5ms-9999msRise time: 1-5us(100Ω load)Supply Voltage: 110V/220V, ±10%, 50/60HzTest duration: 50ms-50000msTest Voltage: 250V AC,300V DCTrigger: BNC,5V TTL -
3ctest PFS 2216SD Power Fail Simulator for EN/IEC 61000-4-11
SKU: sku-590
Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29Mains & EUT Connections: 4mm banana lineOutput Current: 16A AC/DC continuous current; 20A continuous 5s 40Acontinuous 3sPeak inrush current capability: 500 AmpsApplications: EMC Precompliance Testing, Conducted ImmunityRise time: 1-5us(100Ω load)Test duration: 50ms-50000msTest Voltage: 250V AC,300V DCTrigger: BNC,5V TTLInquire for Availability -
Haefely PLINE 1610 Voltage Failure Simulator
SKU: 10503
Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29Voltage Range: 0 - 264 VoltsFrequency Range: 48 to 62 HzCurrent Range: up to 16A rms continuous, 20A @ 80%, 23A @ 70%, 40A @ 40%(rms for 5s)Phase synchronization: Synchronous 0 to 360 resolution, AsynchronousTest duration: 1s to 100 hoursTrigger: Auto, Manual, External$1,275.00Typically In Stock -
Haefely ECOMPACT4 Precompliant EMC Impulse Generator
SKU: sku-320
Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & VariationsStandards Met: IEC/EN 61000-4-4Applications: EMC Precompliance Testing, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITTest Setup Support: Conducted Immunity/Susceptibility Test SetupMax EUT Current (w/ Built in CDN): 16 AmpsMax EUT Voltage (w/ Built in CDN): 60 VoltsPeak inrush current capability: >500 AmpsEFT/Burst Pulse Output Capability: 4.2 kVCombination/Wave Surge Output Capability: 4.2kVExternal Coupling: Data Lines (EFT & Surge), 3PH EUTDips, Interrupts & Variations: 0%, 40%, 70%, 80%Typically In Stock -
3ctest PFS Single Phase Power Fail Simulator
SKU: sku-1108
Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29Applications: EMC Precompliance Testing, Conducted ImmunityEUT Power Handling: up to 260 Volts and 20 Amps (3 Phase models available)Rentals: Ship Same Day4-6 Weeks