Description
How to Rent the EM Test Dito 16.5 kV ESD Simulator:
- Click "Add to Cart" above
- Shipping Section - Select "Use My Account" - we ship this system freight to keep it upright. Indicate in the Notes section if you'd like us to facilitate shipment or if your logistics team will do so.
- Checkout Accordingly
- An EMC Shop representative will contact you with shipping estimates or logistics details.
Electrostatic discharges either from a human body to any other part or between two different objects can cause persistent disturbances or even destruction to sensitive electronics or controls. Voltages of several 1,000 volts are generated. dito is an advanced ESD tester to simulate ESD pulses as per EN/IEC 61000-4-2 and other standards requirements
Compliance Standards Met:
- EN 61000-4-2
- IEC 61000-4-2
- ISO 10605
- ITU-T K.20
- ITU-T K.21
- ITU-T K.45
- MIL STD 461 G CS 118
- And many more!
Videos
Custom Field
Weight 870 gramms incl. battery
Additional Accessories DM1
150pF/330ohm discharge module
PowerPack dito
Rechargeable battery
LiFePo4 12.8V - 1000mAh
Battery charger
Transportation case, grounding lead
2m, test certificate and operation
manual
Air Discharge Voltage Range 500V - 16,500V +/-5%
Contact Discharge Voltage Range 500V - 10,000V +/-5%
Electrostatic Discharge Pulse conforms to IEC 61000-4-2 edition 2
General Data Technical Details
Holding Time More than 5 seconds
Operating Temperature 5°C - 40°C
Output level see data sheet
Outputs CD mode EN/IEC 61000-4-2; 150pF/330ohm
Resolution 100V steps
Rise Time 0.8ns +/- 25%
Standards Met IEC/EN 61000-4-2, ISO 10605
Supply Voltage More than 70,000 pulses @ 16.5kV;
automatic power-off after 10 minutes
if not operated
LiFePo4 12.8V - 1000mAh
Trigger Automatic + Manual