RF Field Strength Meters

RF Field Strength Meters Test Equipment, Systems & Solutions

• 

  Wavecontrol SMP3 RF Field Meter

  SKU: 8899

  Frequency Range: DC to 60 GHz

  Battery Life: >24 Hours

  Readout Values: Total field (instantaneous, max., min. and average) Field components (X, Y, Z)

  Measurement Range: 0.2 - 1000 V/m

  High Pass Filters: 1 Hz, 10 Hz, 25 Hz and 100 Hz

  Probe Selection: E & H Field (DC - 60 GHz)

  More Features: Long and Short Term Recoding Options, Peak and RMS, Many more.

  Typically In Stock

  View Product Cart

• 

  Narda NBM-520 Broadband Field Meter, 100 kHz - 90 GHz

  SKU: 6278

  Measurement Units: V/m, A/m, mW/cm² or W/m², % for shaped probes

  Battery Life: 20 hours

  Recharging Time: 2 hours

  Calibration Status: NIST (5/22/2023)

  PC Interface: Fiber Optic via USB (6 ft cable)

  Software: NBM-TS, Tile, EMCWare, EMC32

  Videos: Software Setup

  Compatible Probes: See

  In Stock

  View Product View Product

• 

  Narda FieldMan 0 Hz to 90 GHz All-in-One Electromagnetic Field Meter

  SKU: 12955

  Frequency Range: 0 Hz/1 Hz/100 kHz to 90 GHz

  Logging Info: Temperature, Humidity, Air Preassure, Geolocation, Distance to Ground

  Electric Field Units: V/m, mW/cm2 , W/m2 , % of standard (depending on the connected probe)

  Magnetic Field Units: A/m, Tesla, Gauss, mW/cm2 , W/m2 , % of standard (depending on the connected probe)

  Compliance Standards: 2013/35/EU, IEC/EN 62311, ICNIRP 1998, ICNIRP 2010, IEC/EN 62233, GB-8702-2014, EMFV 2016

  Industry Standards: IEC / EN 62232, IEC 62577, EN 50519 g. IEC / EN 62233, IEC / EN 62822, EN 50500, IEC 62764, IEC/EN 62110, IEC/EN 60601

  Applications: Radiated Emissions, EMC Radiated Immunity in a Test Chamber

  Battery Life: 16 Hours (2-4 Hour Recharge)

  Operating Modes: Field Strenght, Aptial Agerage, Timer logging, Spectrum/FFT Analysis, Shaped Time Domain assessment, Scope

  Cost New:

  Was:

  Price Now:

  $495.00

  Typically In Stock

  Ordering Options

• 

  Wavecontrol SMP2 Broadband Field Strength Meter

  SKU: 7056

  Weight: 10.6 oz.

  Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.

  Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAh

  Dimensions: 1.5 x 2.0 x 8 inches

  Frequency Range: 100 kHz - 60 GHz

  Operation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)

  Recharging Time: 2 hours

  Standards Met: IEC 61000-4-3

  IN STOCK

  View Product Cart

• 

  Narda Broadband E-Field Meter Kit, 100 kHz - 50 GHz

  SKU: sku-885

  Weight: 10.6 oz.

  Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.

  Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAh

  Dimensions: 1.5 x 2.0 x 8 inches

  Frequency Range: 100 kHz - 60 GHz

  Operation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)

  Recharging Time: 2 hours

  Standards Met: IEC 61000-4-3

  Cost New:

  Was:

  Price Now:

  $595.00

  Typically In Stock

  Ordering Options

• 

  PMM (Narda) EMR-300 Broadband RF Survey Meter, 3 kHz to 60 GHz

  SKU: sku-611

  Weight: 450 g

  Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.

  Battery: 2 ea. AA type, re-chargeable batteries

  Dimensions: 96x64x465 mm

  Frequency Range: varies on probe

  Operation Time: 8 hours (typical)

  Probe Holder Tip: BNC

  Recharging Time: re-charged via supplied charger

  RF Field Probes: E-Field

  Standards Met: IEC/EN 61000-4-3

  View Product Cart

• 

  Narda SRM-3000 Selective Radiation Meter

  SKU: 5773

  Frequency range: 100 kHz to 3 GHz

  Modes: Spectrum Analysis Safety Evaluation, UMTS – P-CPICH Demodulation Time Analysis

  Upper limit of measurement range (MR): -27 dBm to +23 dBm (in steps of 1 dB)

  Display range: From noise floor up to +26 dBm

  Maximum RF power: +30 dBm

  Applications: RF Interference Analysis and EMF Sniffing

  Intrinsic noise: -120 dBm for 1 kHz RBW, f > 20 MHz and no RF attenuation

  RF Input Type: N connector, 50 Ω

  Cost New:

  Was:

  Price Now:

  $495.00

  In Stock

  Ordering Options

• 

  RFM Radiation Meter

  SKU: 12155

  Frequency Range: 5 kHz - 60 GHz

  Measurement Range: 10 mV/m-1000 V/m

  Accuracy: 0.1% +/- 0.5 dB

  Battery Life: 8 Hours

  Typically In Stock

  View Product Cart