Harmonics & Flicker Compliance

Harmonics & Flicker Compliance

To attain the CE Mark in Europe your product must pass several harmonics and flicker susceptibility tests. The EMC Shop stocks a variety of harmonics, fluctuation, and flicker equipment to satisfy most EMC testing requirements.

  • IVYTECH AC Power Source APS-5000A  2000VA/3000VA/5000VA

    IVYTECH AC Power Source APS-5000A 2000VA/3000VA/5000VA

    Response and high accuracy when compared with linear power supply. Output voltage and output current between 0 to rated value is continuously adjustable. Constant voltage and constant current can automatic conversion. Overload and reverse polarity...

    Price: $0.00
    Typically in Stock
  • NX7 Multifunctional Test Generator for Transients up to 7 KV

    NX7 Multifunctional Test Generator for Transients up to 7 KV

    The compact Next Generation NX7 is the most versatile tester to address transient and power fail requirements for both international and commercial standards. Featuring an easy-to-use color touch screen, the NX7 provides an economical solution for...

    Price: $0.00
    Typically in Stock
  • Rohde & Schwarz Handheld Power Analyzer FSH-Z44

    Rohde & Schwarz Handheld Power Analyzer FSH-Z44

    The R&S®FSH-Z44 offers a frequency range from 200 MHz to 4 GHz and a measurement range from 30 mW to 300 W. Brief descriptionDirectional power sensor to be used with the R&S®FSH handheld spectrum analyzer for simultaneous measurement of forward and...

    Price: $0.00
    Typically in Stock
  • LDPS AC Power Source, 1 kW up 4.4 Amps

    LDPS AC Power Source, 1 kW up 4.4 Amps

    LDPS Features Provides an EN61000–3–2 compliant source 1000W power capability at 230V Up to 4·4A rms load current and up to 10A peak currents Comprehensive overload protection Connection via standard power connector

    Price: $0.00
    Typically in Stock
  • California Instruments CSW5550 Programmable AC Power Source

    California Instruments CSW5550 Programmable AC Power Source

    The California Instruments CSW5550 programmable AC power source is equipped with MIL-STD-704 option represents a new generation of AC/DC power sources that address the increasing demands on test equipment to perform additional functions at a lower cost...

    Price: $0.00
    Typically in Stock
  • California Instruments 1501iX Programmable AC Power Source

    California Instruments 1501iX Programmable AC Power Source

    California Instruments 1501iX Description Intergrated System flexible AC/DC power source with a high performance power analyzer The i/iX Series II is rackmountable with a 4U chassis design. All connections are made internally and the need for external...

    Price: $0.00
    Typically in Stock
  • 3 Phase Harmonics & Flicker Test System IEC 61000-3-11 and 3-12

    3 Phase Harmonics & Flicker Test System IEC 61000-3-11 and 3-12

    The 3 Phase Harmonics & Flicker Test System is ideal for meeting IEC 61000-3-11, IEC 61000-3-12 in a lab environment or on installed equipment. The system consists of an 3 Phase AC power source, impedance matching network and a 3 Phase Flicker and...

    Price: $0.00
    Typically in Stock
  • EM Test AIF 503N32.1 3-Phase Flicker Impedance Network

    EM Test AIF 503N32.1 3-Phase Flicker Impedance Network

    The EM Test AIF 503N-series are three-phase flicker impedances with a nominal current from 16A up to 75A per phase offering two different impedance values. Zref is used as the flicker impedance as per IEC/EN 61000-3-3 and specified by IEC 60726. Ztest is...

    Price: $0.00
    Typically in Stock
  • Laplace AC1000 Low Distortion Power Supply up to 1kWatt

    Laplace AC1000 Low Distortion Power Supply up to 1kWatt

    Th Laplace AC1000 supply is rated at 4.4 amps at 240vac, 50Hz. Often referred to as the AC2000’s “clean mains” unit capable of handling 1kW output. Operation is to simply plug input into dirty mains supply and connect EUT to ‘clean’ O/P socket on the...

    Price: $0.00
    Add to Cart
    Typically in Stock
Compare Selected