Categories
Test Equipment
-
Com-Power LI-220C 9 kHz - 30 MHz LISN for CISPR 16-1-2/ANSI C63.4
SKU: 10878
Weight: 20.5 lbs / 9.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 20 Amperes AC, 14 Amperes DCDimensions: 16.75 x 15.5 x 7.5 inches / 42.5 x 39.3 x 19 cmFrequency Range: 9 KHz - 30 MHz$295.00 - $3,965.00Typically In Stock -
Solar 7054-2 EMI Voltage Spike Generator
SKU: 30184
Test Standards: DO-160 SECTION 17, MIL-STD-462Applications: EMI/EMC For Military Aircraft And AviationSpike Amplitude: 10 - 400 VoltsSpike Repetition Rate: 0.8 - 10 Pulses Per SecondSpike Rise Time: 10 microseconds$1,750.00 - $1,950.00IN STOCK -
Fischer Custom Communications F-2031-A-DCN-23mm Decoupling Ferrite Tube for IEC 61000-4-6
SKU: sku-727
Weight: 7.5kGApplication/Test Type: ferrite decoupling clampDimensions: Aperture: 23mm Length: 610mm Height: 134mmFrequency Range: 100kHz - 100MHzStandards Met: IEC/EN 61000-4-6 -
Rohde & Schwarz OSP130 RF Switch
SKU: 438
Rated Frequency: 50 Hz to 60 Hz (± 10 %)Rated Voltage: 100 V to 240 V AC (± 10 %)Dimensions: 465.3 mm × 108.7 mm × 494.8 mmConnectors: USB type A; LAN: Ethernet RJ-45 connector (f), 10/100 Mbit/s; CAN: 9-pin D-Sub connector (m), 512 kbit/s$1,950.00In Stock -
EM Test Automotive Test System for ISO 7637-2
SKU: 10596
ISO Automotive Standards: ISO 7637-2, ISO 16750-2, ISO 11452-8Freestyle Mode Micropulses: Programmable Rise time 1us - 10us in steps of 1us; Pulse duration 50us - 10,000us; Int. resistor 2ohm - 100ohm in steps of 5ohm; 200ohm, 400ohm and 450ohmInput: DUT supply +/- DC voltage from VDS 200N or any other DC supply; Pulse 5, 7 From one LD 200NMicropulse: Micropulse module for test pulses 1, 2A and 6Inquire for availability -
Keytek E503 Ring Wave Simulator for ANSI/IEEE C62.4 and UL 864
SKU: 10546
Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.Pulse repetition: 1 shot/9 secondsPulse voltage (open circuit): 200V - 6.6kV ± 10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864IN STOCK -
Schaffner CDN 8014 Burst/EFT Coupling Clamp for EN/IEC 61000-4-4
SKU: 10545
Compatible Generators: EFT GeneratorsElectrical Noise/Transient ImmunityStandards Met: IEC/EN 61000-4-4$2,990.00Inquire for Availability -
Materials for EFT/Burst Laboratory Test Setup
SKU: 11245
Floor Ground Plate Dimensions: 9" by 6" (Custom sizes available)Standards Met: IEC 60601-1-2, IEC 61000-4-2Applications: Test Setup for Burst/EFT, EMC Precompliance Immunity TestingTable Dimensions: .8 meters (H)Table Top Ground Plane: 1.6m x .8mIN STOCK -
EM Test AutoWave for Generating and Recording Automotive Waveforms
SKU: 21477
Frequency Range: DC - 50 kHzSample Rate: 500 kS/s (1 ch)Output Channels: 2Output Voltage: 10 V, unipolar or bipolarVoltage: 10V, unipolar or bipolarNOT OFTEN -
ISO 11452-8 Magnetic Field Immunity Test System
SKU: 10463
Frequency Range: 15 Hz to 150 kHz.Normative References: ISO 11452-1, Road vehiclesOptional: Artificial NetworksMagnetic Field Strengths: up to 1,000 A/mInquire for Lead Time -
ISO 11452-4 Turn Key Solution for Harness Excitation Methods (BCI and TWC)
SKU: 10459
Test Capabilities: RF Conducted ImmunityStandards Met: ISO 11452-4Applications: Automotive Component Disturbance TestingBCI Test Levels (w/ built-in amplifier): 1000mAFrequency Range (w/ built-in amplifier): 9 kHz - 1 GHzTypically In Stock -
Com-Power EMC Testing Turntables TTW-400 and TTW-600
SKU: TTW-400/600
Table Heights: 9 InchesLoad Ratings: 1000 lbs (455 kg)Power: 115 VAC, 60 HzRemote Switches: Reversing drumsExtension Cables: 9.8 feet (3 meters)Inquire for Availability